The influence of food emulsifiers on fat and sugar dispersions in oils. III. Water content,purity of oils

The influence of water on the interactions between fat and sugar crystals dispersed in triglyceride (vegetable) oils was qualitatively estimated from sedimentation and rheological experiments. The experiments were performed both with and without food emulsifiers (monoglycerides and lecithins) present in the oil. The effects of minor natural oil components (nontriglycerides) on the interactions and on emulsifier adsorption to the crystals were examined by comparing a commercial refined oil and a chromatographically purified oil. The results show that water generally increases the adhesion between fat and sugar crystals in oils and also increases the surface activity of the oil-soluble food emulsifiers. Minor oil components give a small increase in the adhesion between fat and sugar crystals in oils, but do not influence the adsorption of food emulsifiers in any systematic way.     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.     

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties

Polyethylene-layered silicate nanocomposites were prepared by the in situ intercalative polymerization of ethylene by the so-called polymerization-filling technique and analyzed by transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Non-modified montmorillonite and hectorite were first treated by trimethylaluminum-depleted methylaluminoxane before being contacted by a Ti-based constrained geometry catalyst. The nanocomposite was formed by addition and polymerization of ethylene. In the absence of a chain transfer agent, ultra high molecular weight polyethylene was produced. The tensile properties of these nanocomposites were poor and essentially independent of the nature and content of the silicate. Upon hydrogen addition, the molecular weight of the polyethylene was decreased with parallel improvement of the tensile and shear moduli, in relation to the filler content. The exfoliation of the layered silicates was confirmed by XRD analysis and TEM observation. The mechanical kneading of the molten nanocomposites resulted in the partial collapse of the exfoliated structure driven by the thermodynamic stability of the layered filler.     

Detecting Fixed Patterns in Chordal Graphs in Polynomial Time

The Contractibility problem takes as input two graphs G and H, and the task is to decide whether H can be obtained from G by a sequence of edge contractions. The Induced Minor and Induced Topological Minor problems are similar, but the first allows both edge contractions and vertex deletions, whereas the latter allows only vertex deletions and vertex dissolutions. All three problems are NP-complete, even for certain fixed graphs H. We show that these problems can be solved in polynomial time for every fixed H when the input graph G is chordal. Our results can be considered tight, since these problems are known to be W[1]-hard on chordal graphs when parameterized by the size of H. To solve Contractibility and Induced Minor, we define and use a generalization of the classic Disjoint Paths problem, where we require the vertices of each of the k paths to be chosen from a specified set. We prove that this variant is NP-complete even when k=2, but that it is polynomial-time solvable on chordal graphs for every fixed k. Our algorithm for Induced Topological Minor is based on another generalization of Disjoint Paths called Induced Disjoint Paths, where the vertices from different paths may no longer be adjacent. We show that this problem, which is known to be NP-complete when k=2, can be solved in polynomial time on chordal graphs even when k is part of the input. Our results fit into the general framework of graph containment problems, where the aim is to decide whether a graph can be modified into another graph by a sequence of specified graph operations. Allowing combinations of the four well-known operations edge deletion, edge contraction, vertex deletion, and vertex dissolution results in the following ten containment relations: (induced) minor, (induced) topological minor, (induced) subgraph, (induced) spanning subgraph, dissolution, and contraction. Our results, combined with existing results, settle the complexity of each of the ten corresponding containment problems on chordal graphs.     

Colour and COD removal from textile effluent by coagulation and advanced oxidation processes

The aim of this study was to compare the performance of coagulation, Fenton's oxidation (Fe²⁺/H₂O₂) and ozonation for the removal of chemical oxygen demand (COD) and colour from biologically pretreated textile wastewater. FeSO₄ and FeCl₃ were used as coagulants at varying doses and varying colour removal efficiency was measured. For the Fenton process, COD and colour removal efficiencies were found to be 78% and 95% for the Fenton process, and to be 64% and 71% for the Fenton-like process (Fe³⁺/H₂O₂), respectively. Ozonation experiments were conducted at different initial pH values and fixed ozone doses. Ozonation resulted in 43% COD and 97% colour removal whereas these rates increased to 54% and 99% when 5 mg/l hydrogen peroxide was added to the wastewater before ozonation at the same dose. The operating costs of all proposed treatment systems were also evaluated in this study.     

A fuzzy constraint-based approach to data reconciliation in material flow analysis

Data reconciliation consists in modifying noisy or unreliable data in order to make them consistent with a mathematical model (herein a material flow network). The conventional approach relies on least-squares minimization. Here, we use a fuzzy set-based approach, replacing Gaussian likelihood functions by fuzzy intervals, and a leximin criterion. We show that the setting of fuzzy sets provides a generalized approach to the choice of estimated values, that is more flexible and less dependent on oftentimes debatable probabilistic justifications. It potentially encompasses interval-based formulations and the least squares method, by choosing appropriate membership functions and aggregation operations. This paper also lays bare the fact that data reconciliation under the fuzzy set approach is viewed as an information fusion problem, as opposed to the statistical tradition which solves an estimation problem.     

Towards identifying the roll motion parameters of a motorcycle simulator

This study aimed at identifying the roll motion parameters of a motorcycle simulator prototype. Experienced motorcyclists tuned the angular physical movement of the mock-up and that of the visual scene to achieve an optimal riding experience during curves. The participants exceeded the rolling angles that would be required in real-world riding, while avoiding leaning the mock-up beyond 10°. In addition, they were more influenced by the speed of the virtual motorcycle than by road curvature, especially in a wide field of view. Heterogeneity was found in the roll applied to the visual scene. The overall patterns suggest that at least when washout is not applied to remove the side forces that in real-world riding are compensated by a centrifugal force, greater roll of the visual at the expense of the mock-up is mandatory to avoid performance biases that might be enhanced due to fear of falling off the simulator. Future roll motion models must take into consideration factors such as riding postures, which might not only influence the forces operating on the rider-motorcycle system, but also how motorcyclists perceive the visual world.     

H_5N_1亚型禽流感病毒血凝素基因的克隆及分子进化分析

目的　克隆H5N1 亚型禽流感病毒HA基因并进行分子进化分析。方法　应用RT PCR方法 ,以 2株H5N1 亚型禽流感病毒RNA为模板 ,扩增了HA全基因cDNA。将HAcDNA基因克隆于pUCm T载体 ,并对其进行了测序。结果　所克隆的HA基因全长为 1731bp ,共编码 5 6 8个氨基酸。将该毒株与其它 10株H5亚型禽流感病毒HA基因序列核苷酸及氨基酸进行比较 ,其核苷酸同源性在 80 5 %～ 99 2 %之间 ,氨基酸序列同源性在 89 4 %～98 6 %之间。高致病性毒株HA基因裂解位点存在多个碱性氨基酸插入。结论　为禽流感基因工程疫苗的研制奠定了基础 ,同时通过分子进化分析也揭示了各毒株间的亲缘关系。     

Late season nitrogen fertilization of soybeans: effects on leaf senescence, yield and environment

Nitrogen demand from soybean seeds during seed filling is very high and has been proposed as the cause of nitrogen remobilization and leaf senescence. Previous research has not shown consistent effects of late season fertilization on seed yield, while its effects on leaf senescence have not been evaluated. Two field experiments were performed to determine the effects of a late season N fertilization on leaf senescence and fall, seed yield and its components, and residual soil nitrate, and to evaluate the potential risk of groundwater contamination. Two rates of nitrogen (50 and 100 kg N ha^–1) were applied at the R3 and R5 development stages. Nitrogen fertilization, either at R3 or R5, increased soil nitrate availability during the seed-filling period. Seed yield, seed number and protein content were not affected by N fertilization. The addition of 100 kg N ha^–1 produced a small delay of 1–2 days in the leaf fall, and slightly increased seed size (3.6%). Our results suggest that increasing soil N availability during the seed-filling period is not an effective way to delay leaf senescence or to increase seed growth and yield of soybean. Nitrogen fertilization increased the level of residual nitrate in the top soil at one site (the one with lowest seed yield), increasing the risk of nitrate leaching during subsequent fallow.     

Chemoattraction between fry of Arctic char [Salvelinus alpinus (L.)] studied in a Y-maze fluviarium

Attraction of fry of Arctic char [Salvelinus alpinus (L.)] to water conditioned by conspecifics of the same age was studied in a Y-maze fluviarium. Two types of experiments were run. In up-swimming tests (1), starting from the common leg of the Y-maze, a single fish was given the choice of entering one of the two upstream arms. In gradient tests (2), the momentary positions of a single char were time-lapse photographed in a test yard of this common shank. Strong attraction to conditioned water was observed in both types of tests.